|
HighWire HW400c/M Gateway and Communication Server cPCI Blade
Home :: Products & Services
:: PTMC::
Hw400cM
No Longer Recommended for New Designs, Use This Product Instead HW400c/2
HighWire HW400c/M Gateway and Communication Server cPCI Blade
PTMC core processing platform with PICMG 2.16
- MPC8245 PowerPC processor, 333 MHz
- Dual CT Bus enabled PTMC Sites
- Mix and match PMC and PTMC
- Dual front or rear access 10/100 Ethernet
- Linux and VxWorks OS support
Overview
One Stop Systems's HighWire series of communications controller products provide high bandwidth intelligent connectivity to servers designed to act as gateways and signaling points within communication networks and network devices. For embedded Linux applications, HighWire products can be coupled with our WAN and LAN PCI mezzanine cards or other third party PMC products to create a highly flexible core computing and connectivity solution for communications, military/government, medical and industrial control markets.
The HW400c/M is a 6U CompactPCI core processor with dual PTMC sites, dual
Ethernet, PICMG 2.16 Packet Switched Backplane, and H.110 CT-Bus interfaces.
This modular, flexible core processing blade is available in a bundled solution
that couples the HW400c/M with TimeSys Linux GPL Software Developers Kit (SDK)
to provide a complete blade computing platform for scalable, high-availability
networking.
Designed as an advanced technology building block for processor enabled
telephony and data communications I/O solutions, the HW400c/M has two modular
I/O sites that support both standard PMC and CT Bus enabled PTMC modules. The
PTMC sites are linked to a time slot interchanger and full H.110 CT bus
interface for a complete TDM switching solution. Two 10/100 Ethernet controllers
provide software selectable front or rear panel access or dual node CompactPCI
Packet Switched Backplane support.
A 333 MHz MPC8245 PowerPC processor with 64MB of fast SDRAM and an extended
Flash memory array provides a core protocol processing engine for servicing
installed modules, dual cPSB/Ethernet ports, host PCI, and TDM interface.
HW400c/M-compatible PTMC CT Bus-enabled modules provide channelized
DSP,
T3, T1, E1, and J1 interfaces and PMC modules for most telecom and data
communications applications.
Features
- MPC8245 PowerPC processor, 333 MHz
- Two CT Bus enabled PTMC sites
- Mix and match PMC and PTMC
- Dual node 10/100
- Dual front or rear access 10/100 Ethernet
- H.110 CT Bus interface (4096 timeslots)
- 32/64-bit, 33/66 MHz PCI 2.2 compliant
- Full and basic CompactPCI Hot Swap
- Front and rear I/O support
- 128MB SDRAM
- 33MB Flash
- Optional TimeSys Linux
- Developer Kit available
HW400c/M Hardware Specifications
|
System Processor |
Motorola MPC8245 PowerPC |
|
Memory |
SDRAM – 128MB
Socketed Flash – 1MB
Soldered Flash – 8/16/32MB
NVRAM – 2KB |
|
|
PTMC Sites |
2 x PICMG 2.15, PT2MC
PICMG 2.3 Rear I/O Mapping
3.3V or 5V Signaling |
|
|
PSB/Ethernet |
2 x 10/100 Ethernet
Single or Dual Node PSB
Selectable Front Panel or PSB |
|
|
PCI Interface |
32/64-bit 33/66MHz PCI 2.2
PICMG 2.1 R2.0 Full Hot Swap |
|
|
H.110 Interface |
PICMG 2.5 CT Bus Interface
4096 Timeslot H.110
2560 Timeslot Local CT Bus |
|
|
Power Requirements |
+5VDC @ approximately 600mA Core
+3.3VDC @ approximately 1.5A Core
+12VDC @ approximately 45mA Core
-12VDC @ approximately 1mA Core
PTMC Sites @ up to 7.5W Each Site |
|
|
Form Factor |
6U x 4HP (single slot) |
|
|
Environmental |
|
|
|
Temperature |
Operating: -5 to 55C (23 to 131F)
Non-operating: -40 to 70C (-40 to 158F) |
|
|
Humidity |
Operating: 5 to 90% non-condensing
Non-operating: 0 to 95% non-condensin |
|
|
Compliance |
NEBS, BABT |
|
|
Certifications |
CE, UL, cUL, FCC Class A (all pending) |
|
|
