HighWire HW400c/2 Gateway and Communication Server cPCI Blade
Home :: Products & Services
:: PTMC::
Hw400c2
HighWire HW400c/2 Gateway and Communication Server cPCI Blade
PTMC core processing platform with PICMG 2.16
MPC7447A PowerPC processor, 1.0 GHz
Two CT Bus enabled PTMC sites (PT2MC or PT5MC)
H.110 CT Bus interface (4096 timeslots)
Dual node Gigabit Ethernet (PICMG 2.16 cPSB)
System Management IPMI/IPMB (PICMG 2.9)
Overview
One Stop Systems's HighWire series of communications controller products provide high bandwidth intelligent connectivity to servers designed to act as gateways and signaling points within communication networks and network devices. For embedded Linux applications, HighWire products can be coupled with our WAN and LAN PCI mezzanine cards or other third party PMC products to create a highly flexible core computing and connectivity solution for communications, military/government, medical and industrial control markets.
The HW400c/2 is a 6U CompactPCI core processor with dual PTMC sites, dual
Ethernet, PICMG 2.16 Packet Switched Backplane, and H.110 CT-Bus interfaces.
This modular, flexible core processing blade is available in a bundled solution
that couples the HW400c/M with TimeSys Linux GPL Software Developers Kit (SDK)
to provide a complete blade computing platform for scalable, high-availability
networking.
Designed as an advanced technology building block for processor enabled
telephony and data communications I/O solutions, the HW400c/2 has two modular
I/O sites that support both standard PMC and CT Bus enabled PTMC modules. The
PTMC sites are linked to a time slot interchanger and full H.110 CT bus
interface for a complete TDM switching solution. Two 10/100 Ethernet controllers
provide software selectable front or rear panel access or dual node CompactPCI
Packet Switched Backplane support.
A 1.0 GHz MPC7447A PowerPC processor with 64MB of fast SDRAM and an extended
Flash memory array provides a core protocol processing engine for servicing
installed modules, dual cPSB/Ethernet ports, host PCI, and TDM interface.
HW400c/2-compatible PTMC CT Bus-enabled modules provide channelized
T3, T1, E1, and J1 interfaces and PMC modules for most telecom and data
communications applications.
Download Manual
Download Data Sheet
Features
MPC7447A PowerPC processor,1.0 GHz Two CT Bus enabled PTMC sites (autosensing PT2MC or PT5MC) High speed non-blocking Gigabit Ethernet switch Dual node Gigabit Ethernet (PICMG 2.16 cPSB) Front panel management via 10/100/1000 Ethernet H.110 CT Bus interface(4096 timeslots) Full and basic CompactPCI Hot Swap (PICMG 2.1) System Management IPMI/IPMB (PICMG 2.9) Front and rear I/O support Front and rear I/O support Up to 1 GB DDR333 SDRAM 128 MB Flash File System Linux Developer Kit (options for Real Time and Carrier Grade)
HW400c/2 Hardware Specifications
|
System Processor Architecture |
Freescale MPC7447A PowerPC, 1.0 GHz
Marvell MV64462 System Controller
|
|
Memory |
256 MB or 1 GB DDR SDRAM
128 MB Disk-on-Chip Flash File System
Boot ROM and NVRAM |
|
PTMC Sites |
2x PICMG 2.15, PT2MC, PT5MC sites - 3.3V signaling
PICMG 2.3 Rear I/O Mapping |
|
PSB/Ethernet |
2x 10/100/1000 Ethernet cPSB - PICMG 2.16 Single or Dual Node
2x 10/100/1000 Ethernet per PT5MC site
Additional Front Panel RJ45 Ethernet |
|
H.110 Interface |
PICMG 2.5 CT Bus Interface
4096 Timeslot H.110
2560 Timeslot Local CT Bus (PT2MC)
4096 Timeslot Local CT Bus (PT5MC) |
|
|
CompactPCI Interface |
32/64-bit, 33/66 MHz PCI 2.2
PICMG 2.1 R2.0 Full Hot Swap
CompactPCI 6U x 4HP (single slot) |
|
Power Requirements |
20 W (max) @ +5 VDC
5.3 W (max) @ +3.3 VDC
10.7 W (max) @ VIO
PTMC sites @ up to 15 W per site |
|
Certifications |
CE, UL, cUL, FCC Class A (pending) |
|
Drivers |
Linux |
|
|
