Home :: Products & Services :: Hardware:: KatanaQP ATCA

KatanaQp ATCA Blade

Above: KatanaQp ATCA board shown

Above: KatanaQp ATCA board shown in a 3U chassis .

The picture at right shows the Emerson KatanaQp ATCA board in a 3U chassis

Single or Dual PowerPC MPC7447A or MPC7448 processors running at up to 1.3GHz
2-Way SMP Architecture
ATCA PICMG 3.1 Node (1000Base-T Base Fabric + Octal High Speed GbE Fabric)
Layer 2/3 Ethernet switch option
Quad PTMC expansion sites
Redundant System Management Bus with IPM Controller
Up to 2 GByte DDR SDRAM w/ECC in SO-DIMM package
Up to 64MB Linear Flash
Real-Time Clock with supercap backup
Linux Support

OC3 STM-1 PTMC Module

SigC641x-PTMC Octal DSP Resource Board

SigC5561-7x7-PTMC VoIP Board

For general info, please fill out info forms on individual pages, or send email to info (at) signalogic (dot) com. Comments, suggestions, or problems with our web site? Contact the Signalogic web team at web_team (at) signalogic (dot) com
Gen Info: 214-349-5551 | Ordering Info

Signalogic, DirectCore, CIM, and "We make computing faster" are registered trademarks of Signalogic, Inc. coCPU, EdgeStream, RobotHPC, SentinEye, DeepDome, and DeepLI are trademarks of Signalogic. Nvidia is a registered trademark and DeepStream is a trademark of Nvidia Corporation. Roomba is a registered trademark of iRobot. MATLAB is a registered trademark of The MathWorks. Telogy Networks is a registered trademark of Texas Instruments-Telogy. LabVIEW and Hypersignal are registered trademarks of National Instruments. Windows and Visual Studio are trademarks of Microsoft.

Signalogic operates primarily in SIC Code 7373 and NAICS Code 541512, and secondarily in SIC codes 3679 and 7372, and NAICS codes 541511, 334111, 518210, and 513210.

Links to external web pages on this website are provided as a convenience and for informational purposes only; they do not constitute an endorsement or an approval by Signalogic of any of products, services, or opinions of corporation, organization or individual web pages so linked. Signalogic bears no responsibility for the accuracy, legality or content of any linked external web pages or that of their subsequent links.

Use this website at Your Own Risk. We provide technical information and material on this website for informational, research and development, and study purposes only. All information and material on this website is technical in nature and not intended as advice for financial, business, or health purposes. We try to ensure that information and material posted to this website is accurate and with adequate descriptions. Despite our efforts, content on this website may, from time to time, contain errors.

Some of the pictures used on this website Copyright © 2002 by Daniel Speck at FreeStockPhotos.com